KTM · PowerParts · Air filter box
The KTM Air Filter Sand Protection is a KTM PowerParts add-on designed for extremely dusty conditions. It works as an additional protective layer to help reduce premature sanding of the air filter, supporting cleaner intake air in harsh environments.
This Air filter box component, part number A46006922000, is intended for riders who regularly face deep dust and want longer time between air filter service. By adding a secondary barrier ahead of the main filter element, it helps extend the filter service intervals while keeping the primary filter from taking the full impact of airborne sand and fine debris.
Protection
Recommended for extremely dusty conditions, this sand protection layer is aimed at off-road environments where fine particles are constantly suspended in the air. It helps add a practical buffer against sand and dust before they reach the main air filter surface.
Design
Designed to act as an additional protective layer, this component supports the air filter by taking on some of the contamination load first. That extra barrier helps reduce direct exposure of the primary filter to abrasive sand and dirt.
Maintenance
By helping prevent premature sanding of the air filter, the KTM Air Filter Sand Protection is intended to extend the filter service intervals. This can be especially valuable when riding in consistently dusty terrain where frequent filter maintenance is otherwise required.
Protection
Dust and sand can accelerate wear on an air filter when conditions are consistently harsh. This sand protection is designed to reduce premature sanding of the air filter by adding an extra layer of protection ahead of the main filtering element. The result is a setup aimed at keeping the primary filter from being overloaded too quickly in extremely dusty conditions, while supporting more consistent intake protection over time.
Installation
This KTM PowerParts Air Filter Sand Protection (A46006922000) is listed for a range of KTM models and model years shown in the vehicle compatibility table on the page. Confirming the compatibility list before installation helps ensure the correct application for the intended motorcycle and avoids mismatched airbox components.
| Part Number | A46006922000 |
|---|---|
| Product Line | KTM PowerParts |
| Category | Air filter box |
| Model — Model Years |
|---|
| 125 SX — 2023–2026 |
| 125 XC — 2023–2025 |
| 125 XC-W — 2025–2027 |
| 150 EXC — 2024–2025 |
| 150 SX — 2025 |
| 150 XC-W — 2024 |
| 250 EXC — 2024–2025 |
| 250 EXC Champion Edition — 2025 |
| 250 EXC Six Days — 2024–2025 |
| 250 EXC-F — 2024–2027 |
| 250 EXC-F 6Days — 2026 |
| 250 EXC-F 6DAYS — 2027 |
| 250 EXC-F Champion Edition — 2025 |
| 250 EXC-F Six Days — 2024–2025 |
| 250 SX — 2024–2027 |
| 250 SX-F — 2023–2026 |
| 250 SX-F Adamo Edition — 2025 |
| 250 SX-F Factory Edition — 2022, 2024–2026 |
| 250 XC — 2023–2027 |
| 250 XC-F — 2023–2027 |
| 250 XC-W — 2024 |
| 300 EXC — 2024–2027 |
| 300 EXC 6DAYS — 2027 |
| 300 EXC 6Days — 2026 |
| 300 EXC Champion Edition — 2025–2026 |
| 300 EXC Hardenduro — 2024–2027 |
| 300 EXC Six Days — 2024–2025 |
| 300 SX — 2023–2027 |
| 300 XC — 2023–2027 |
| 300 XC-W — 2024 |
| 300 XC-W Hardenduro — 2026–2027 |
| 350 EXC-F — 2024–2027 |
| 350 EXC-F 6DAYS — 2027 |
| 350 EXC-F 6Days — 2026 |
| 350 EXC-F Champion Edition — 2025 |
| 350 EXC-F Six Days — 2024–2025 |
| 350 SX-F — 2023–2026 |
| 350 XC-F — 2023–2025, 2027 |
| 350 XC-F Factory Edition — 2023–2026 |
| 450 EXC-F — 2024–2027 |
| 450 EXC-F 6DAYS — 2027 |
| 450 EXC-F 6Days — 2026 |
| 450 EXC-F Six Days — 2024–2025 |
| 450 SMR — 2023–2027 |
| 450 SX-F — 2023–2026 |
| 450 SX-F Factory Edition — 2022–2026 |
| 450 XC-F — 2023–2027 |
| 450 XCF-W — 2024–2027 |
| 500 EXC-F — 2024–2027 |
| 500 EXC-F 6DAYS — 2026–2027 |
| 500 EXC-F 6Days — 2026 |
| 500 EXC-F Champion Edition — 2025 |
| 500 EXC-F Six Days — 2024–2025 |
Vehicle compatibility as captured from KTM for article number A46006922000.
KTM approval notice: Closed Course Competition Use Only, in the EU.
