KTM · PowerParts · Wheels
The KTM Factory Wheel Bearing Repair Kit is a rear wheel service kit designed to help protect the wheel bearing from contamination and extend component life. Offered in Black, this KTM PowerParts kit (part number 79610919100C1) focuses on blocking common intrusions like mud, sand, and water that can accelerate wear.
By reducing exposure to debris and moisture, it helps lower wear on sealing rings and wheel bearings for longer service life. It is a practical choice for riders maintaining their rear wheel assembly and looking to support consistent bearing performance over time. See the specifications and compatibility details below for fitment information.
Maintenance
Designed to provide optimal protection against the penetration of mud, sand, and water into the wheel bearing. Keeping these elements out supports cleaner operation around the bearing area and helps maintain sealing effectiveness during use.
Durability
By reducing wear on sealing rings and wheel bearings, this kit is aimed at extending service life. It targets the common causes of premature bearing wear by improving protection at the sealing points of the rear wheel.
Protection
Built as a wheel bearing repair kit with a wheel bearing protection cap set and low friction shaft sealing rings. Included components are shown on the page, making it easy to confirm what comes in the box before installation.
Protection
This KTM PowerParts kit is specified for Rear alignment and is intended to help shield the rear wheel bearing area from the elements that can work past standard sealing. The approach centers on protecting the bearing environment from mud, sand, and water, helping reduce the chance of accelerated wear and keeping the rear wheel assembly better protected during operation. Refer to the specifications section for the listed details.
Maintenance
The Factory Wheel Bearing Repair Kit combines a wheel bearing protection cap set with low friction shaft sealing rings to create a focused solution for bearing-area sealing and protection. By addressing both external intrusion and sealing-ring friction, it is designed to reduce wear on key components and support longer service life for the wheel bearing system over time. Included components are shown on the page.
Installation
Vehicle compatibility is provided for a range of KTM models and years, and this kit should be matched to the listings shown in the compatibility table. Confirming fitment against that table ensures the correct application for the intended rear wheel setup before ordering or installation.
| Part Number | 79610919100C1 |
|---|---|
| Product Line | KTM PowerParts |
| Category | Wheels > Special parts |
| Colour | Black |
| Alignment | Rear |
| Component | Article Number |
|---|---|
| Wheel Bearing Repair Kit | 78010916044 |
| Factory Wheel Bearing Protection Cap Set | 79610917100C1 |
| Model — Model Years |
|---|
| 125 EXC — 2016 |
| 125 EXC Six Days — 2016 |
| 125 XC-W — 2017–2019 |
| 150 EXC — 2023 |
| 150 EXC TPI — 2020–2022 |
| 150 XC-W — 2017–2019, 2023 |
| 150 XC-W TPI — 2020–2022 |
| 200 EXC — 2016 |
| 200 XC-W — 2016 |
| 250 EXC — 2016–2018, 2023 |
| 250 EXC Six Days — 2016–2017, 2023 |
| 250 EXC Six Days TPI — 2019–2020, 2022 |
| 250 EXC TPI — 2018–2022 |
| 250 EXC TPI Six Days — 2018, 2021 |
| 250 EXC-F — 2016–2023 |
| 250 EXC-F Six Days — 2016–2023 |
| 250 XC-W — 2016–2019, 2023 |
| 250 XC-W TPI — 2018–2022 |
| 250 XCF-W — 2016 |
| 300 EXC — 2016–2023 |
| 300 EXC Erzbergrodeo — 2023 |
| 300 EXC Six Days — 2016–2017, 2019, 2023 |
| 300 EXC Six Days TPI — 2019–2020, 2022 |
| 300 EXC TPI — 2018–2022 |
| 300 EXC TPI Erzberg Edition — 2020 |
| 300 EXC TPI Erzbergrodeo — 2021–2022 |
| 300 EXC TPI Six Days — 2018, 2021 |
| 300 XC-W — 2016–2018, 2023 |
| 300 XC-W Erzbergrodeo — 2023 |
| 300 XC-W Six Days — 2016–2018 |
| 300 XC-W Six Days TPI — 2020 |
| 300 XC-W TPI — 2019–2022 |
| 300 XC-W TPI Erzbergrodeo — 2020, 2022 |
| 300 XC-W TPI Six Days — 2019 |
| 350 EXC-F — 2016–2023 |
| 350 EXC-F Factory Edition — 2022 |
| 350 EXC-F Six Days — 2016–2023 |
| 350 EXC-F Wess — 2021 |
| 350 XCF-W — 2016, 2020–2022 |
| 350 XCF-W Six Days — 2016 |
| 450 EXC — 2016 |
| 450 EXC Six Days — 2016 |
| 450 EXC-F — 2017–2023 |
| 450 EXC-F Six Days — 2017–2023 |
| 450 XC-W — 2016 |
| 450 XCF-W — 2023 |
| 500 EXC — 2016 |
| 500 EXC Six Days — 2016 |
| 500 EXC-F — 2017–2023 |
| 500 EXC-F Six Days — 2017–2023 |
| 500 XC-W — 2016 |
| 500 XCF-W — 2020–2022 |
Vehicle compatibility as captured from KTM for article number 79610919100C1.
KTM approval notice: Homologation not needed, in the EU.
