KTM · PowerParts · Wheels
The KTM Factory Wheel Bearing Repair Kit is designed to help shield the rear wheel bearing area from mud, sand, and water that can work past standard sealing points during demanding riding. Finished in Electronic Orange, it focuses on keeping contamination out where it matters most to support consistent wheel function and reduce unwanted ingress.
This kit, part number 79610919000EB, is intended to reduce wear on sealing rings and wheel bearings, helping extend service life through improved protection. It is supplied as a wheel bearing repair kit featuring a wheel bearing protection cap set together with low friction shaft sealing rings, offering a purpose-built solution for riders looking to keep rear wheel bearing components better protected.
Protection
Built to provide optimal protection against the penetration of mud, sand, and water into the wheel bearing. By adding an extra layer of defense at the bearing area, it helps reduce the exposure that can accelerate wear during off-road conditions.
Durability
By reducing wear on the sealing rings and wheel bearings, this repair kit is aimed at extending the service life of key rear wheel components. It is a practical choice for riders who want to minimize premature bearing and seal wear.
Maintenance
The kit includes low friction shaft sealing rings along with a wheel bearing protection cap set. This combination is designed to protect the bearing area while maintaining a low-friction sealing interface as part of the overall repair kit concept.
Protection
This KTM PowerParts kit targets the rear alignment and is engineered to help prevent common contaminants from reaching the wheel bearing. Mud, sand, and water can shorten bearing and seal life; this kit is designed to reduce that intrusion and help keep the bearing area better protected in demanding conditions. For listed fitment details, refer to the compatibility information shown on the page.
Maintenance
The Factory Wheel Bearing Repair Kit is supplied with a Factory Wheel Bearing Protection Cap Set and the Wheel Bearing Repair Kit. Together, these components provide a focused approach to protecting the wheel bearing area while using low friction shaft sealing rings as part of the system. See the included components section for what is provided.
| Part Number | 79610919000EB |
|---|---|
| Product Line | KTM PowerParts |
| Category | Wheels > Special parts |
| Colour | Electronic Orange |
| Alignment | Rear |
| Component | Article Number |
|---|---|
| Factory Wheel Bearing Protection Cap Set | 79610917100EB |
| Wheel Bearing Repair Kit | 78010916044 |
| Model — Model Years |
|---|
| 125 EXC — 2016 |
| 125 EXC Six Days — 2016 |
| 125 XC-W — 2017–2019 |
| 150 EXC — 2023 |
| 150 EXC TPI — 2020–2022 |
| 150 XC-W — 2017–2019, 2023 |
| 150 XC-W TPI — 2020–2022 |
| 200 EXC — 2016 |
| 200 XC-W — 2016 |
| 250 EXC — 2016–2018, 2023 |
| 250 EXC Six Days — 2016–2017, 2023 |
| 250 EXC Six Days TPI — 2019–2020, 2022 |
| 250 EXC TPI — 2018–2022 |
| 250 EXC TPI Six Days — 2018, 2021 |
| 250 EXC-F — 2016–2023 |
| 250 EXC-F Six Days — 2016–2023 |
| 250 XC-W — 2016–2019, 2023 |
| 250 XC-W TPI — 2018–2022 |
| 250 XCF-W — 2016 |
| 300 EXC — 2016–2023 |
| 300 EXC Erzbergrodeo — 2023 |
| 300 EXC Six Days — 2016–2017, 2019, 2023 |
| 300 EXC Six Days TPI — 2019–2020, 2022 |
| 300 EXC TPI — 2018–2022 |
| 300 EXC TPI Erzberg Edition — 2020 |
| 300 EXC TPI Erzbergrodeo — 2021–2022 |
| 300 EXC TPI Six Days — 2018, 2021 |
| 300 XC-W — 2016–2018, 2023 |
| 300 XC-W Erzbergrodeo — 2023 |
| 300 XC-W Six Days — 2016–2018 |
| 300 XC-W Six Days TPI — 2020 |
| 300 XC-W TPI — 2019–2022 |
| 300 XC-W TPI Erzbergrodeo — 2020, 2022 |
| 300 XC-W TPI Six Days — 2019 |
| 350 EXC-F — 2016–2023 |
| 350 EXC-F Factory Edition — 2022 |
| 350 EXC-F Six Days — 2016–2023 |
| 350 EXC-F Wess — 2021 |
| 350 XCF-W — 2016, 2020–2022 |
| 350 XCF-W Six Days — 2016 |
| 450 EXC — 2016 |
| 450 EXC Six Days — 2016 |
| 450 EXC-F — 2017–2023 |
| 450 EXC-F Six Days — 2017–2023 |
| 450 XC-W — 2016 |
| 450 XCF-W — 2023 |
| 500 EXC — 2016 |
| 500 EXC Six Days — 2016 |
| 500 EXC-F — 2017–2023 |
| 500 EXC-F Six Days — 2017–2023 |
| 500 XC-W — 2016 |
| 500 XCF-W — 2020–2022 |
Vehicle compatibility as captured from KTM for article number 79610919000EB.
KTM approval notice: Homologation not needed, in the EU.
