KTM · PowerParts · Wheels
The KTM Wheel Bearing Protection Cap Kit is a front-wheel protection upgrade designed to help keep contaminants away from the wheel bearing area. Finished in Black, this kit focuses on limiting the penetration of mud, sand, and water that can work past the outer sealing surfaces during demanding riding.
With part number 79609915000C1, it is built to reduce wear on sealing rings and wheel bearings, helping support a longer service life. It is a smart choice for riders who spend time in wet, sandy, or muddy conditions and want added protection for critical wheel components. See the specifications and the listed model fitment details below.
Designed to offer optimal protection against mud, sand, and water entering the wheel bearing area. By helping keep debris and moisture out, it supports more consistent wheel bearing performance in harsh riding environments.
By reducing exposure to contamination, the cap kit helps reduce wear on sealing rings and wheel bearings. That added protection can contribute to a longer service life for these high-wear components.
Specified for the front alignment, this kit is intended for use at the front wheel bearing area. Confirm the fitment list shown on the page to ensure it matches the KTM models and years it is listed for.
Wheel bearings and their sealing rings can see heavy stress when riding through mud, sand, and water. This protection cap kit is designed to reduce how easily those elements can penetrate into the wheel bearing area, helping shield key components from the conditions that accelerate wear.
This Wheel Bearing Protection Cap Kit is a KTM PowerParts item in the Wheels > Special parts category and is listed as a front-alignment component. Review the specifications shown on the page and refer to the provided compatibility table for the KTM models and model years it is listed for.
| Part Number | 79609915000C1 |
|---|---|
| Product Line | KTM PowerParts |
| Category | Wheels > Special parts |
| Colour | Black |
| Alignment | Front |
| Model — Model Years |
|---|
| 125 EXC — 2016 |
| 125 EXC Six Days — 2016 |
| 125 XC-W — 2017–2019 |
| 150 EXC — 2023 |
| 150 EXC TPI — 2020–2022 |
| 150 XC-W — 2017–2019, 2023 |
| 150 XC-W TPI — 2020–2022 |
| 200 EXC — 2016 |
| 200 XC-W — 2016 |
| 250 EXC — 2016–2018, 2023 |
| 250 EXC Six Days — 2016–2017, 2023 |
| 250 EXC Six Days TPI — 2019–2020, 2022 |
| 250 EXC TPI — 2018–2022 |
| 250 EXC TPI Six Days — 2018, 2021 |
| 250 EXC-F — 2016–2023 |
| 250 EXC-F Six Days — 2016–2023 |
| 250 XC-W — 2016–2019, 2023 |
| 250 XC-W TPI — 2018–2022 |
| 250 XCF-W — 2016 |
| 300 EXC — 2016–2023 |
| 300 EXC Erzbergrodeo — 2023 |
| 300 EXC Six Days — 2016–2017, 2019, 2023 |
| 300 EXC Six Days TPI — 2019–2020, 2022 |
| 300 EXC TPI — 2018–2022 |
| 300 EXC TPI Erzberg Edition — 2020 |
| 300 EXC TPI Erzbergrodeo — 2021–2022 |
| 300 EXC TPI Six Days — 2018, 2021 |
| 300 XC-W — 2016–2018, 2023 |
| 300 XC-W Erzbergrodeo — 2023 |
| 300 XC-W Six Days — 2016–2018 |
| 300 XC-W Six Days TPI — 2020 |
| 300 XC-W TPI — 2019–2022 |
| 300 XC-W TPI Erzbergrodeo — 2020, 2022 |
| 300 XC-W TPI Six Days — 2019 |
| 350 EXC-F — 2016–2023 |
| 350 EXC-F Factory Edition — 2022 |
| 350 EXC-F Six Days — 2016–2023 |
| 350 EXC-F Wess — 2021 |
| 350 XCF-W — 2016, 2020–2022 |
| 350 XCF-W Six Days — 2016 |
| 450 EXC — 2016 |
| 450 EXC Six Days — 2016 |
| 450 EXC-F — 2017–2023 |
| 450 EXC-F Six Days — 2017–2023 |
| 450 XC-W — 2016 |
| 450 XCF-W — 2023 |
| 500 EXC — 2016 |
| 500 EXC Six Days — 2016 |
| 500 EXC-F — 2017–2023 |
| 500 EXC-F Six Days — 2017–2023 |
| 500 XC-W — 2016 |
| 500 XCF-W — 2020–2022 |
Vehicle compatibility as captured from KTM for article number 79609915000C1.
KTM approval notice: Homologation not needed, in the EU.
