KTM · PowerParts · Wheels
The KTM Wheel Bearing Protection Cap Kit is a KTM PowerParts wheel upgrade designed to help shield the rear wheel bearing area from harsh riding conditions. Finished in Electronic Orange, it focuses on keeping contaminants away from the bearing and sealing surfaces to support consistent performance and reduced downtime.
This kit (part number 79610915100EB) is intended to provide optimal protection against the penetration of mud, sand, and water into the wheel bearing. By limiting contamination at the seal area, it also helps reduce wear on sealing rings and wheel bearings to promote a longer service life. See the specifications and the compatibility list below for full details.
Protection
Designed to help prevent mud, sand, and water from reaching the wheel bearing area. By keeping these elements out, the protection caps support cleaner operation at the rear wheel where exposure is frequent in demanding conditions.
Durability
By reducing contamination at the sealing surface, this kit helps reduce wear on sealing rings and wheel bearings. The result is a practical way to support longer component service life and more consistent rear wheel bearing condition over time.
Comfort
Built for a rear alignment application, this protection cap kit targets the rear wheel bearing area specifically. Refer to the specifications section for the listed alignment and to the compatibility table for the motorcycles it is shown to fit.
Wheel bearings and seal areas are constantly exposed to roost, moisture, and fine grit. The Wheel Bearing Protection Cap Kit is designed to provide optimal protection against the penetration of mud, sand, and water into the wheel bearing, helping keep the rear wheel bearing area better defended in messy conditions.
Contamination can accelerate wear at the sealing rings and the wheel bearing itself. This kit is intended to reduce that wear by limiting what reaches the sealing surfaces, helping support a longer service life for the sealing rings and wheel bearings on the rear wheel.
This product is part of the KTM PowerParts line in the Wheels > Special parts category and is listed with rear alignment. The vehicle compatibility table on the page shows the KTM motorcycles and model years this kit is associated with.
| Part Number | 79610915100EB |
|---|---|
| Product Line | KTM PowerParts |
| Category | Wheels > Special parts |
| Colour | Electronic Orange |
| Alignment | Rear |
| Model — Model Years |
|---|
| 125 EXC — 2016 |
| 125 EXC Six Days — 2016 |
| 125 XC-W — 2017–2019 |
| 150 EXC — 2023 |
| 150 EXC TPI — 2020–2022 |
| 150 XC-W — 2017–2019, 2023 |
| 150 XC-W TPI — 2020–2022 |
| 200 EXC — 2016 |
| 200 XC-W — 2016 |
| 250 EXC — 2016–2018, 2023 |
| 250 EXC Six Days — 2016–2017, 2023 |
| 250 EXC Six Days TPI — 2019–2020, 2022 |
| 250 EXC TPI — 2018–2022 |
| 250 EXC TPI Six Days — 2018, 2021 |
| 250 EXC-F — 2016–2023 |
| 250 EXC-F Six Days — 2016–2023 |
| 250 XC-W — 2016–2019, 2023 |
| 250 XC-W TPI — 2018–2022 |
| 300 EXC — 2016–2023 |
| 300 EXC Erzbergrodeo — 2023 |
| 300 EXC Six Days — 2016–2017, 2019, 2023 |
| 300 EXC Six Days TPI — 2019–2020, 2022 |
| 300 EXC TPI — 2018–2022 |
| 300 EXC TPI Erzberg Edition — 2020 |
| 300 EXC TPI Erzbergrodeo — 2022 |
| 300 EXC TPI Six Days — 2018, 2021 |
| 300 XC-W — 2016–2018, 2023 |
| 300 XC-W Erzbergrodeo — 2023 |
| 300 XC-W Six Days — 2016–2018 |
| 300 XC-W Six Days TPI — 2020 |
| 300 XC-W TPI — 2019–2022 |
| 300 XC-W TPI Erzbergrodeo — 2020, 2022 |
| 300 XC-W TPI Six Days — 2019 |
| 350 EXC-F — 2016–2023 |
| 350 EXC-F Factory Edition — 2022 |
| 350 EXC-F Six Days — 2016–2023 |
| 350 XCF-W — 2022 |
| 450 EXC — 2016 |
| 450 EXC Six Days — 2016 |
| 450 EXC-F — 2017–2023 |
| 450 EXC-F Six Days — 2017–2023 |
| 450 XC-W — 2016 |
| 450 XCF-W — 2023 |
| 500 EXC — 2016 |
| 500 EXC Six Days — 2016 |
| 500 EXC-F — 2017–2023 |
| 500 EXC-F Six Days — 2017–2023 |
| 500 XC-W — 2016 |
| 500 XCF-W — 2022 |
Vehicle compatibility as captured from KTM for article number 79610915100EB.
KTM approval notice: Homologation not needed, in the EU.
